SEARCH | ucmu 279/575

SEARCH ON UCMU

Prezzo:

4490

Video

Tornio usato COMEC TGA 160 S 400 x 750 mm Pb 40 mm ricondizionato con

19 October 2020 at 06:05:25

Il tornio COMEC TGA 160 S è costruito in italia macchina robusta con basamento in ghisa pesante completo di torretta porta utensili registrabile in altezza IMPERO, mandrino autocentrante Ø 160 mm a 3 griffe e contropunta rotante, lunetta fissa e mobile e chiavi di servizio bussola di riduzione con contropunta fissa CM3.

Macchina controllata e ripristinata dove necessario in tutte le sue funzioni per garantire la massima precisione di lavorazione.

Adeguata alle vigenti normative in materia di sicurezza.
Caratteristiche tecniche del tornio COMEC TGA 160 S

    Altezza punte sul banco: 200 mm
    Diametro massimo tornibile sul banco: 400 mm
    Diametro massimo tornibile sul carro: 95 mm
    Distanza tra le punte: 700 mm
    Attacco mandrino: CAMLOCK D1-4"
    Diametro passaggio barra: 40 mm
    Diametro autocentrante: 160 mm
    Gamma velocità 12: 50 a 1800 giri/min
    Corsa slitta trasversale: 180 mm
    Corsa slitta portautensili: 210 mm
    Attacco contropunta: CM3
    Corsa canotto contropunta: 119 mm
    Diametro canotto: 48 mm
    Avanzamento longitudinale: 0.050 ÷ 0.700 mm/giro
    Avanzamento trasversale: 0.033  ÷ 0.480 mm/giro
    Filettature Metriche: 0.5 ÷  7 mm
    Filettature Whitworth: 4 ÷ 56
    Filettature Modulari: Mod. da 0.5 a 3.5
    Potenza motore: 2.2 kW
    Tensione alimentazione: 400 V 50 Hz
    Dimensioni: 1500 x 800 x 1800 h mm
    Peso: 1200 Kg

Il tornio COMEC TGA 160 S è costruito in italia macchina robusta con basamento in ghisa pesante completo di torretta porta utensili registrabile in altezza IMPERO, mandrino autocentrante Ø 160 mm a 3 griffe e contropunta rotante, lunetta fissa e mobile e chiavi di servizio bussola di riduzione con contropunta fissa CM3.

Macchina controllata e ripristinata dove necessario in tutte le sue funzioni per garantire la massima precisione di lavorazione.

Adeguata alle vigenti normative in materia di sicurezza.
Caratteristiche tecniche del tornio COMEC TGA 160 S

    Altezza punte sul banco: 200 mm
    Diametro massimo tornibile sul banco: 400 mm
    Diametro massimo tornibile sul carro: 95 mm
    Distanza tra le punte: 700 mm
    Attacco mandrino: CAMLOCK D1-4"
    Diametro passaggio barra: 40 mm
    Diametro autocentrante: 160 mm
    Gamma velocità 12: 50 a 1800 giri/min
    Corsa slitta trasversale: 180 mm
    Corsa slitta portautensili: 210 mm
    Attacco contropunta: CM3
    Corsa canotto contropunta: 119 mm
    Diametro canotto: 48 mm
    Avanzamento longitudinale: 0.050 ÷ 0.700 mm/giro
    Avanzamento trasversale: 0.033  ÷ 0.480 mm/giro
    Filettature Metriche: 0.5 ÷  7 mm
    Filettature Whitworth: 4 ÷ 56
    Filettature Modulari: Mod. da 0.5 a 3.5
    Potenza motore: 2.2 kW
    Tensione alimentazione: 400 V 50 Hz
    Dimensioni: 1500 x 800 x 1800 h mm
    Peso: 1200 Kg

B.S. Macchine S.r.l.

Nome:

0434630602

info@bsmacchine.it

E-Mail:

Tel:

Indirizzo:

Via Enzo Ferrari 5 Villotta di Chions 33083

Prezzo:

Video

TRUMPF TRULASER TUBE 7000,OPTIONAL 30' RAW PIECE LENGTH, MFG:2011

18 October 2020 at 15:21:10

TruLaser Tube 7000 Specifications
Z-axis: 8 in. (200 mm)
Y-axis: 8 in. (200 mm)
Optional 10 in (254 mm)
X-axis: 252 in. (6500 mm)
Optional 360 in. (9200 mm)
Rotation axis A1-(Rotating Chuck and Feed Unit): 360
Rotation axis A2-(Tube Feed Guide Unit): 360

Capacitive height regulation range: + 0.79 in. (20 mm)
Positioning speeds, maximum:
X: 3,937 in./min. (100 m/min)
Y: 2,362 in./min. (60 m/min)
Z: 2,362 in./min (60 m./min.)
A: 900/sec

Max. length of raw tube for automated production: 252 in (Optional 360 in.)
Max. wall thickness: 0.3 in. (8 mm)
Max. tube weight 8 in: 17 lbs / linear ft
Optional max tube weight 10 in: 25 lbs / linear ft
Length of finished part: 120 in - Standard machine unload
251 in. - PRS 6001

Tube waste length: Round/Rect./Square tubes:
4.7 in. (120 mm) Min.

Largest tube cross-sections that can be worked: 8 in. (203.2 mm) diameter

envelope
10 in (254.0 mm) as option

Smallest tube cross-sections that can be worked: Round tubes: O 0.6 in. (15

mm)
Minimum edge length on square and
rectangular tubes: 0.6 in. (15 mm)

Laser units: (in Watts) TruFlow 3600
System power consumption: See installation conditions
Control system: Siemens 840D
Max. working pressure: 290 psi. (20 bar)
Working height: 44.3 in. (1,125 mm)
Space requirements (standard version): See layout
Total weight: Varies with the configuration
*Accuracy (X, Y, Z, A axes):
Smallest programmable increment: 0.0004" (0.01 mm) / 0.001
Positioning accuracy (Pa) + 0.008" (+ 0.2 mm) / 0.015
Repeatability (Ps) + 0.002" (+ 0.06 mm) / 0.005

TruLaser Tube 7000 Specifications
Z-axis: 8 in. (200 mm)
Y-axis: 8 in. (200 mm)
Optional 10 in (254 mm)
X-axis: 252 in. (6500 mm)
Optional 360 in. (9200 mm)
Rotation axis A1-(Rotating Chuck and Feed Unit): 360
Rotation axis A2-(Tube Feed Guide Unit): 360

Capacitive height regulation range: + 0.79 in. (20 mm)
Positioning speeds, maximum:
X: 3,937 in./min. (100 m/min)
Y: 2,362 in./min. (60 m/min)
Z: 2,362 in./min (60 m./min.)
A: 900/sec

Max. length of raw tube for automated production: 252 in (Optional 360 in.)
Max. wall thickness: 0.3 in. (8 mm)
Max. tube weight 8 in: 17 lbs / linear ft
Optional max tube weight 10 in: 25 lbs / linear ft
Length of finished part: 120 in - Standard machine unload
251 in. - PRS 6001

Tube waste length: Round/Rect./Square tubes:
4.7 in. (120 mm) Min.

Largest tube cross-sections that can be worked: 8 in. (203.2 mm) diameter

envelope
10 in (254.0 mm) as option

Smallest tube cross-sections that can be worked: Round tubes: O 0.6 in. (15

mm)
Minimum edge length on square and
rectangular tubes: 0.6 in. (15 mm)

Laser units: (in Watts) TruFlow 3600
System power consumption: See installation conditions
Control system: Siemens 840D
Max. working pressure: 290 psi. (20 bar)
Working height: 44.3 in. (1,125 mm)
Space requirements (standard version): See layout
Total weight: Varies with the configuration
*Accuracy (X, Y, Z, A axes):
Smallest programmable increment: 0.0004" (0.01 mm) / 0.001
Positioning accuracy (Pa) + 0.008" (+ 0.2 mm) / 0.015
Repeatability (Ps) + 0.002" (+ 0.06 mm) / 0.005

Jordan Craig Machinery

Nome:

jc@jordancraigmachinery.com

E-Mail:

Tel:

Indirizzo:

New City NY 10956

Prezzo:

Video

50"X, 20"Y, 25"Z, HAAS VF4 MFG:1996

18 October 2020 at 15:17:32

Table Size: 52" x 18"
Table Height from Floor: 36"
Spindle Nose to Table: 4"
Max Table Load: 3,500 lbs.
X-Travel: 50"
Y-Travel: 20"
Z-Travel: 25"
Spindle Speed: 7,500 RPM
Spindle Taper: Cat 40
X,Y & Z Axis: Rapids: 710, Cutting Feed-Rate: 500 710 IPM
Brushless Servos,
20 Tool Auto Tool Changer
Voltage: 208/230
HP: 20-HP Vector Drive

Table Size: 52" x 18"
Table Height from Floor: 36"
Spindle Nose to Table: 4"
Max Table Load: 3,500 lbs.
X-Travel: 50"
Y-Travel: 20"
Z-Travel: 25"
Spindle Speed: 7,500 RPM
Spindle Taper: Cat 40
X,Y & Z Axis: Rapids: 710, Cutting Feed-Rate: 500 710 IPM
Brushless Servos,
20 Tool Auto Tool Changer
Voltage: 208/230
HP: 20-HP Vector Drive

Jordan Craig Machinery

Nome:

jc@jordancraigmachinery.com

E-Mail:

Tel:

Indirizzo:

New City NY 10956

Prezzo:

Video

80"X x 30"Y x 30"Z, FADAL 8030 HT,MFG:2004

18 October 2020 at 15:15:58

SPECIFICATIONS:
TABLE SIZE .... 82.5" x 30"
MACHINE TRAVELS:
X - AXIS ....... 80"
Y - AXIS ....... 30"
Z - AXIS ....... 30"
TABLE TOP TO SPINDLE ...... 5.5" - 35.5"
THROAT DEPTH ..... 30"
SPINDLE NOSE ...... #40 CT
SPINDLE SPEED ..... 10,000 RPM
TOOL MAGAZINE .. 24 ATC
MAX TOOL DIAMETER ..... 3" / 6"
MAX TOOL LENGTH ......... 15"
MAIN MOTOR ..... 22.5 HP
MACHINE WEIGHT ...... 17,500 LBS.
APPROXIMATE DIMENSIONS .... 209"W x 103"D x 119"H

EQUIPPED WITH:
FADAL CNC CONTROL
SIDE MOUNTED AUTOMATIC TOOL CHANGER (24) STATION
RIGID TAPPING
BOX WAYS ALL AXES
CHIP CONVEYOR
COOLANT SYSTEM

SPECIFICATIONS:
TABLE SIZE .... 82.5" x 30"
MACHINE TRAVELS:
X - AXIS ....... 80"
Y - AXIS ....... 30"
Z - AXIS ....... 30"
TABLE TOP TO SPINDLE ...... 5.5" - 35.5"
THROAT DEPTH ..... 30"
SPINDLE NOSE ...... #40 CT
SPINDLE SPEED ..... 10,000 RPM
TOOL MAGAZINE .. 24 ATC
MAX TOOL DIAMETER ..... 3" / 6"
MAX TOOL LENGTH ......... 15"
MAIN MOTOR ..... 22.5 HP
MACHINE WEIGHT ...... 17,500 LBS.
APPROXIMATE DIMENSIONS .... 209"W x 103"D x 119"H

EQUIPPED WITH:
FADAL CNC CONTROL
SIDE MOUNTED AUTOMATIC TOOL CHANGER (24) STATION
RIGID TAPPING
BOX WAYS ALL AXES
CHIP CONVEYOR
COOLANT SYSTEM

Jordan Craig Machinery

Nome:

jc@jordancraigmachinery.com

E-Mail:

Tel:

Indirizzo:

New City NY 10956

Prezzo:

Video

32"X, 20"Y, 28"Z, HAAS EC-500 HORIZONTAL MACHINEING CENTER,MFG:2008

18 October 2020 at 15:14:35

SPECIFICATIONS:
X-AXIS TRAVEL .......... 32"
Y-AXIS TRAVEL .......... 20"
Z-AXIS TRAVEL .......... 28"
SPINDLE SPEED .......... 12,000 RPM
SPINDLE MOTOR .......... 30/40 HP
SPINDLE TAPER .......... CAT 40
TOOL POSITIONS ......... 70 ATC
PALLET INDEXING ........ FULL 4TH AXIS
PALLET DIMENSIONS ...... 19.69" X 19.69"
NUMBER OF PALLETS ...... (2)
MAXIMUM WORKPIECE WEIGHT 1,000 LBS.

EQUIPPED WITH:
FULL 4TH AXIS
THRU SPINDLE COOLANT (1000 PSI)
HENNIG CHIP CONVEYOR
ADVANCED TOOL MANAGEMENT
RIGID TAPPING
QUICK CODES
MACROS
70 POCKET AUTOMATIC TOOL CHANGER
MANUALS

SPECIFICATIONS:
X-AXIS TRAVEL .......... 32"
Y-AXIS TRAVEL .......... 20"
Z-AXIS TRAVEL .......... 28"
SPINDLE SPEED .......... 12,000 RPM
SPINDLE MOTOR .......... 30/40 HP
SPINDLE TAPER .......... CAT 40
TOOL POSITIONS ......... 70 ATC
PALLET INDEXING ........ FULL 4TH AXIS
PALLET DIMENSIONS ...... 19.69" X 19.69"
NUMBER OF PALLETS ...... (2)
MAXIMUM WORKPIECE WEIGHT 1,000 LBS.

EQUIPPED WITH:
FULL 4TH AXIS
THRU SPINDLE COOLANT (1000 PSI)
HENNIG CHIP CONVEYOR
ADVANCED TOOL MANAGEMENT
RIGID TAPPING
QUICK CODES
MACROS
70 POCKET AUTOMATIC TOOL CHANGER
MANUALS

Jordan Craig Machinery

Nome:

jc@jordancraigmachinery.com

E-Mail:

Tel:

Indirizzo:

New City NY 10956

*

*

Heading 6

U.C.M.U.

SEARCH ON UCMU